Uniarch DVR NVR all models password reset methods

Uniarch DVR NVR all models password reset methods

by
Uniarch What to do when I forget the NVR unlock pattern?

You can click on Uniarch ‘Enter password’ on the unlock pattern page and use the login password to log in.

1628167652(1).jpg

How to disable unlock pattern on NVR monitor?

Log into the NVR on the monitor, go to 【System】>【User】，click on ‘Edit’ on the admin User row, input the login password. And then on the pop-up window you will see an option named ‘Enable Unlock Pattern’, please uncheck it and click on ‘OK’.

1628167686(1).jpg

How to disable unlock pattern on NVR monitor?

Log into the NVR on the monitor, go to 【System】>【User】，click on ‘Edit’ on the admin User row, input the login password. And then on the pop-up window you will see an option named ‘Enable Unlock Pattern’, please uncheck it and click on ‘OK’.

1628167686(1).jpg

How to disable login password on Uniarch NVR？

Log into your NVR on the Monitor, go to【System】>【Basic】>【Basic Setup】, uncheck ‘Enable Password Protection’ and click on ‘Apply’, and the login password will be disabled.

1628167770(1).jpg

How to change the login password of admin user?

Step1. Log into the NVR on the monitor, go to 【System】>【User】， click on the Edit icon on the admin user row, input the old password, input the new password for twice, click on ‘OK’.

1628167804(1).jpg

Step 2. You can also change the password on the NVR web interface.

1628167828.jpg

1628167851(1).jpg

What to do When I forget login password?

If you forget the login password of your device, please try below instructions:

Step 1. Please try default password before resetting password, the default username/password is admin/123456

Step  2. If it still says ‘incorrect username or password’，please send an email to service@uniview.com or dial UNV hotline service number USA|8008607999, Canada|8009146008 with below information.

  • Serial number

How to find the serial number of my device?

Step 1. You can find it on the white label on the device.

BPHM{G5OQ}57FUQC6{B9UY8.png

Step 2. You can also use EZTools to search and find the SN.

(https://global.uniview.com/Support/Download_Center/Tool/201502/787314_168459_0.htm)

EZTools2.0

TS$E{$)5%5NGTU1HK[1Y%UE.png

  • System date

How to find the current device system date?

The System date of camera can be found on web interface，click ‘forget password’ on the login web page of the camera and you will see the device date on the pop-up window.

AGYX$S76YEB9OC0UE}3S79Q.png

How to change the login password of admin user?

Log into the web interface of the camera, go to 【Security】>【User List】, click on and select admin user(the admin user row will turn gray if it is selected), click on ‘Edit’. Then a new window will pop up and you can input the old password and new password, then click on ‘OK’.

Y8LY%O)ZTN92R(LCA5N9A]H.png

How to log into an Uniarch NVR?

Step 1. Connect a monitor to the NVR through a VGA or HDMI cable, and a mouse to the USB port of the NVR.

1628167119(1).jpg

The default username/password is admin/123456.

1628167234(1).jpg

Step 2. We can also access into the web interface of NVR via Internet Explorer on a PC. And Internet Explorer (9.0 or later version) is recommended.

How to modify the IP address of Uniarch product?

The default IP address of NVR is 192.168.1.30, DHCP is enabled by default.

Step 1. Connect the camera (NVR) to the same local network with PC

1628167898(1).jpg

Step 2. Install EZTools on PC and Click on 【Refresh】 to search for the camera IP address（https://global.uniview.com/Support/Download_Center/Tool/201502/787314_168459_0.htm ).

1628167913(1).jpg

Step 3. Select the device and modify IP after login

1628167927(1).jpg

1628167947(1).jpg

Step 4. The IP address also can be configured after logging into the device

19 thoughts on “Uniarch DVR NVR all models password reset methods”

Leave a Comment