The H.264 DVR firmware xvr upgrade tool allows you to update the firmware on a generic H.264 DVR using your computer/laptop. The tool is installed on the computer and then it communicates with the DVR via the local network. So, …
How to Install the Waterproof Lid Applies to: All PoE IP cameras. Step 1. Separate all the parts of waterproof lid. Step 2. Thread the Ethernet cable through the waterproof lid. Step 3. Push the Rubber ring(Part 3) to the main body(Part 2). Step …
How to Adjust PIR Angle Similar in functionality to Parallax’s PIR sensor (555-28027), the wide-angle PIR sensor features a larger detection angle of 180°. This makes it ideal in applications where users need to track movements across a large, open area. …
How to Live Stream Your Device on YouTube Purpose: Using FFmpeg as an encoder for YouTube Live has fewer requirements on the hardware. While you may need some basic knowledge about FFmpeg. Contents: 1. How it works? 2. How to …
How to Repair the Camera by Matching Code when It Loses Connection to the NVR? The 4 cameras in the package were set up wirelessly to connect NVR when they were produced in our factory. Load More : Unable to Connect …
How to Set Up 24 Hours Recording Purpose: You could setup 24 hours recording for the system. Please make sure there is an internal hard disk drive before recording. Without the hard drive, the system can show live viewing, but …
Night Owl DVR / NVR Troubleshooting IMPORTANT: For more detailed information specific to your model or if you do not see your issue listed below, please see your product’s manual on your Series support page. Load More : How to troubleshoot …
How to Add a Device to the Night Owl Protect App for Android a. Adding a Recorder (DVR/NVR) A recorder will be automatically added to the Night Owl Protect app when you set up a recorder with an Internet connection. When …
How to Add a Device to the Night Owl Protect App for iOS a. Adding a Recorder (DVR/NVR) A recorder will be automatically added to the Night Owl Protect app when you set up a recorder with an Internet connection. …
How to check your Nat Status? Where to find the Serial Number(SN) and QR code of system? 1. How to check your Nat Status: Right click the mouse-Mainmenu- Info-Version You can see the Nat Status. If it is “Connected“, it means …
CMS can help you to manage your DVR/NVR both locally and remotely.How to connect But before adding your DVR/NVR to CMS, please go to Main Menu–Info–Version to make sure NAT status is connected. If you have problem, please click this …