How to Repair the Camera by Matching Code when It Loses Connection to the NVR? The 4 cameras in the package were set up wirelessly to connect NVR when they were produced in our factory. Load More : Unable to Connect …
How to Connect Non-POE or Wireless IP Camera to POE NVR via the Onvif Protocol? Usually, the POE NVR system we sell includes several POE IP cameras so that camera can be plugged into NVR’s ethernet port directly. Load More …
How to Set Up 24 Hours Recording Purpose: You could setup 24 hours recording for the system. Please make sure there is an internal hard disk drive before recording. Without the hard drive, the system can show live viewing, but …
How to check your Nat Status? Where to find the Serial Number(SN) and QR code of system? 1. How to check your Nat Status: Right click the mouse-Mainmenu- Info-Version You can see the Nat Status. If it is “Connected“, it means …
connect cloud Please plug DVR or NVR into router with network cable if you wanna use a computer or phone to connect recorder locally or remotely. You can judge whether recorder has connected to cloud by status of network like …
Why do moving objects blur and how to correct this? Overview This article will address the cause of blurred moving subjects in video footage and the potential steps to reduce the blurring, along with the possible consequences of making such …
Video Loss Troubleshooting for DVRs NVRs This is a basic setup guide that you need to double check if in case your cameras are not showing any images. On this guide, it will show you a bit more detailed version …
How to Connect IP Camera to HCVR and Pentabrids To Connect an IP Camera: Please Note: This applies to Tribrid HCVR Units and Pentabrids. Description This allows IP Cameras to be connected to HCVR and Pentabrids. Load More : How to Connect …
How to Reset the Camera to Factory Default on DVR? Purpose: For some newly released analog cameras, they have their own OSD menu. In this menu, the users could change the working mode, adjust the image parameters, and reset the camera, …
Access the DVR/NVR System via Guarding Vision Software on PC Summary: This article shows you the steps to access the ANNKE system on a computer via the client software Guarding Vision. Adding via IP address only allow local access (ANNKE …
How to Fix the Video Loss? #1. Check the Connection Between Cameras and the DVR #2. Check If the Camera Is On On the premise that all cameras and the monitor are connected to the DVR, but all cameras show …